 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET E30/15/7 E cores and accessories Supersedes data of February 2002 2004 Sep 01 Ferroxcube E cores and accessories CORE SETS Effective core parameters SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of core half VALUE 1.12 4000 67.0 60.0 49.0 11 UNIT mm mm3 mm mm2 mm2 g R 0.5 1 E30/15/7 30.8 0 1.4 1.0 19.5 0 0 7.2 0.5 9.7 0.5 0 15 0.2 R1 7.3 0 0.5 Dimensions in mm. Fig.1 E30/15/7 core half. Core halves AL measured in combination with a non-gapped core half, clamping force for AL measurements 20 10 N, unless stated otherwise. GRADE 3C81 AL (nH) 100 5%(1) 160 5% 250 5% 315 5% 400 8% 630 3C90 5% 2500 25% 100 5%(1) 160 5% 250 5% 315 5% 400 8% 630 3C91 3C92 3C94 3C96 2004 Sep 01 5% 1900 25% 2500 25% 1400 25% 1900 25% 1600 25% e AIR GAP ( m) 1100 580 330 240 180 100 0 1100 580 330 240 180 100 0 0 0 0 0 369 TYPE NUMBER E30/15/7-3C81-E100 E30/15/7-3C81-A160 E30/15/7-3C81-A250 E30/15/7-3C81-A315 E30/15/7-3C81-A400 E30/15/7-3C81-A630 E30/15/7-3C81 E30/15/7-3C90-E100 E30/15/7-3C90-A160 E30/15/7-3C90-A250 E30/15/7-3C90-A315 E30/15/7-3C90-A400 E30/15/7-3C90-A630 E30/15/7-3C90 E30/15/7-3C91 E30/15/7-3C92 E30/15/7-3C94 E30/15/7-3C96 89 142 222 280 355 560 2220 89 142 222 280 355 560 1690 2220 1250 1690 1420 Ferroxcube E cores and accessories GRADE 3F3 AL (nH) 100 5%(1) 160 5% 250 5% 315 5% 400 8% 630 3F35 Note 5% 1600 25% 1250 25% AIR GAP ( m) 1100 580 330 240 180 100 0 0 E30/15/7 TYPE NUMBER E30/15/7-3F3-E100 E30/15/7-3F3-A160 E30/15/7-3F3-A250 E30/15/7-3F3-A315 E30/15/7-3F3-A400 E30/15/7-3F3-A630 E30/15/7-3F3 E30/15/7-3F35 e 89 142 222 280 355 560 1420 1110 1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 20 10 N. Core halves of high permeability grades Clamping force for AL measurements 20 10 N. GRADE 3C11 3E27 AL (nH) 3300 25% 4100 25% e AIR GAP ( m) 0 0 TYPE NUMBER E30/15/7-3C11 E30/15/7-3E27 2930 3640 2004 Sep 01 370 Ferroxcube E cores and accessories Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 25 kHz; T = 100 C 320 330 320 370 330 340 320 300 f = 25 kHz; B = 200 mT; T = 100 C 0.82 0.45 0.48 0.27(1) 0.36 0.36 0.27 0.47 1.6(1) 2.0 2.0 1.6 CORE LOSS (W) at f = 100 kHz; B = 100 mT; T = 100 C f = 100 kHz; B = 200 mT; T = 100 C E30/15/7 f = 400 kHz; B = 50 mT; T = 100 C 3C81 3C90 3C91 3C92 3C94 3C96 3F3 3F35 0.80 Properties of core sets under power conditions (continued) B (mT) at GRADE H = 250 A/m; f = 25 kHz; T = 100 C 320 330 320 370 330 340 320 300 0.54 4.2 1.5 f = 500 kHz; B = 50 mT; T = 100 C CORE LOSS (W) at f = 500 kHz; B = 100 mT; T = 100 C f = 1 MHz; B = 30 mT; T = 100 C f = 3 MHz; B = 10 mT; T = 100 C 3C81 3C90 3C91 3C92 3C94 3C96 3F3 3F35 Note 1. Measured at 60 C. 2004 Sep 01 371 Ferroxcube E cores and accessories COIL FORMERS GENERAL DATA FOR E30/15/7 COIL FORMER WITHOUT PINS PARAMETER Coil former material Maximum operating temperature SPECIFICATION E30/15/7 polyamide (PA6.6), glass reinforced, flame retardant in accordance with ; UL file number E41613(M) 120 C 20.1 max. 7.5 0.1 0 9 0 0.2 19.1 max. 17 min. 19 Dimensions in mm. Fig.2 E30/15/7 coil former. WINDING DATA FOR E30/15/7 COIL FORMER WITHOUT PINS (E) NUMBER OF SECTIONS 1 WINDING AREA (mm2) 80 MINIMUM WINDING WIDTH (mm) 17.0 AVERAGE LENGTH OF TURN (mm) 56 TYPE NUMBER CP-E30/15/7-1S 2004 Sep 01 372 Ferroxcube E cores and accessories GENERAL DATA FOR 10-PINS E30/15/7 COIL FORMER PARAMETER Coil former material Pin material Maximum operating temperature Resistance to soldering heat Solderability SPECIFICATION E30/15/7 phenolformaldehyde (PF), glass reinforced, flame retardant in accordance with ; UL file number E167521(M) copper-tin alloy (CuSn), tin-lead alloy (SnPb) plated, transition to lead-free (Sn) ongoing. 180 C, class H , Part 2, Test Tb, method 1B: 350 C, 3.5 s , Part 2, Test Ta, method 1: 235 C, 2 s 19 0 0.3 0 9.3 0.2 0.2 7.5 0 19 0 0.3 (17.1 min.) 0.8 0 0.1 5.08 19 max. 2 0.1 0 7.5 0.2 9.3 0 0 0.2 3 0.8 0.02 24.1 max. 1.3 29.1 max. 0.15 0 Dimensions in mm. Fig.3 E30/15/7 coil former; 10-pins. WINDING DATA FOR 10-PINS E30/15/7 COIL FORMER (E) NUMBER OF NECTIONS 1 WINDING AREA (mm2) 80 MINIMUM WINDING WIDTH (mm) 17.1 AVERAGE LENGTH OF TURN (mm) 56 TYPE NUMBER CSH-E30/7-1S-10P 2004 Sep 01 373 Ferroxcube E cores and accessories MOUNTING PARTS General data and ordering information ITEM Clasp Spring CuZn alloy, Ni plated stainless steel (CrNi) REMARKS FIGURE 4 5 E30/15/7 TYPE NUMBER CLA-E30/15/7 SPR-E30/15/7 10.5 3.9 0.8 8.8 0.1 2.5 2 7.5 0 0.1 0.6 12.8 2.2 7.6 min. 2.9 5 32.2 0.2 32 28 0.9 0.65 0.4 (2 ) 3.3 0 0.15 0.5 24 31.1 max. Dimensions in mm. Dimensions in mm. Fig.4 E30/15/7 clasp. Fig.5 E30/15/7 spring. 2004 Sep 01 374 Ferroxcube E cores and accessories DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS E30/15/7 This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2004 Sep 01 375 |
Price & Availability of CLA-E15
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |